CappsNC NC-Fit Probing Example

The Goal

Trim a layer of material without touching the bottom layer​

The Challenge

The part fixturing behaves as non-rigid, with large deviations from its model

The Solution

Use NCFIT to adapt the CNC cutting program to actual measured profile

CappsNC NC-Fit Probing Example

  1. Create a measurement program from the cutting program using NC-Fit.
  2. Measure the part profile over the cutting trim lines
  3. Use NC-Fit to reposition the new cutting program based on the newly measured data

CappsNC NC-Fit Probe-Fit-Cut example